About
Wall module,
for local insertion of audio signals to PA matrix mixing amplifier PA-M224 or PA-M412.
- Intended use: Volume control for the respective zone, local input of audio signals
- 2 RCA sockets for line signals
- Microphone connection via 3-pin XLR socket
- 14 V phantom power
- Adjustable volume
- Signal selection button with indicator LED, enabling priority routing of locally fed audio signals (MIC or LINE) in the respective zone
- Connection to the PA-M224 or PA-M412 and power supply via an RJ45 socket and Cat 5 network cable (copper; cable not supplied), for cable lengths up to 200Â m
Manufacturer information:
MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Safety and warning notices
Only use the device indoors and protect it from dripping and splashing water, high humidity and heat (permissible operating temperature range 0 - 40 °C).
Do not operate the appliance if there is visible damage to the appliance, if a defect is suspected after a fall or similar, or if malfunctions occur. Always return the appliance to a specialised workshop for repair.
If the appliance is to be taken out of service permanently, hand it over to a local recycling centre for environmentally friendly disposal.
Do not operate the appliance if there is visible damage to the appliance, if a defect is suspected after a fall or similar, or if malfunctions occur. Always return the appliance to a specialised workshop for repair.
If the appliance is to be taken out of service permanently, hand it over to a local recycling centre for environmentally friendly disposal.
