Order no.: 0244290

STA-1506

Order no.: 0244290

STA-1506

6-channel PA amplifier,
with integrated limiter.
  • Balanced inputs
  • High-pass filter, low-pass filter, can be activated as required for each channel
  • Tamper-resistant level adjustment on the rear panel
  • 8 Ω bridged operation possible
  • LED VU meter and LED per channel for indicating overload (clip)
  • Soft start
  • Ground lift switch
  • Speaker switch-on delay
  • Fan cooling
  • Protected against short circuit, overheating and DC voltage overlay at the outputs
SOUNDCHECK 01/2006
“Presents itself as a power unit during monitor operation at stage performances in a club. The multi-channel concept of these amplifiers works out perfectly.”

PROSOUND 03/2006
(STA-1508)
“Can solve a lot of problems all at once. Is worth every cent of its price.”
Manufacturer information:
MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Warning and Safety Instructions
The device is supplied with dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Risk of electric shock!
Do not use this device and disconnect it immediately from the power supply if the device or the power supply cable is visibly damaged, if a defect might have occurred after the device was dropped or suffered a similar accident, if malfunctions occur. Any repairs must be carried out by specialists.
The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity (admissible ambient temperature range is 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
The heat generated in the device must be dissipated by air circulation. Never cover the air vents of the housing.
If the device is to be put out of operation definitely, dispose of the product in accordance with local regulations.

About

6-channel PA amplifier,
with integrated limiter.
  • Balanced inputs
  • High-pass filter, low-pass filter, can be activated as required for each channel
  • Tamper-resistant level adjustment on the rear panel
  • 8 Ω bridged operation possible
  • LED VU meter and LED per channel for indicating overload (clip)
  • Soft start
  • Ground lift switch
  • Speaker switch-on delay
  • Fan cooling
  • Protected against short circuit, overheating and DC voltage overlay at the outputs
SOUNDCHECK 01/2006
“Presents itself as a power unit during monitor operation at stage performances in a club. The multi-channel concept of these amplifiers works out perfectly.”

PROSOUND 03/2006
(STA-1508)
“Can solve a lot of problems all at once. Is worth every cent of its price.”
Manufacturer information:
MONACOR INTERNATIONAL GmbH & Co. KG
Konsul-Smidt-Str. 68
28217 Bremen
Germany
info@monacor.com
Warning and Safety Instructions
The device is supplied with dangerous mains voltage. Leave servicing to skilled personnel only and do not insert anything into the air vents. Risk of electric shock!
Do not use this device and disconnect it immediately from the power supply if the device or the power supply cable is visibly damaged, if a defect might have occurred after the device was dropped or suffered a similar accident, if malfunctions occur. Any repairs must be carried out by specialists.
The product is suitable for indoor use only. Protect it against dripping water, splash water and high air humidity (admissible ambient temperature range is 0 - 40 °C).
Never pull the mains cable to disconnect the mains plug from the socket, always seize the plug.
The heat generated in the device must be dissipated by air circulation. Never cover the air vents of the housing.
If the device is to be put out of operation definitely, dispose of the product in accordance with local regulations.

Specifications

Peak output power 1,400 W
Power rating 960 W
Power rating at 4 Ω 6 x 160 W
Power rating at 8 Ω 6 x 100 W
Power rating with 8 Ω bridged operation 3 x 320 W
Channels 6
Inputs 0.7 V/20 kΩ
Frequency range 12-20,000 Hz
Crossover network yes
Crossover frequency 240 Hz
Integrated limiter yes
S/N ratio > 80 dB
Crosstalk attenuation > 60 dB
THD < 0.1%
Power supply ˜ 230 V/50 Hz/1,800 VA
Mains voltage ~ 230 V
Mains frequency 50 Hz
Power consumption, operation 1,800 VA
Admiss. ambient temp. 0-40 °C
Width 482 mm
Height 132 mm
Depth 310 mm
Rack units, RU 3
Weight 15.5 kg
Connections 6 x 3-pole XLR, bal.

6 x screw terminal

Packaging dimensions (W x H x L) 0.52 x 0.22 x 0.43 m
Gross weight 17.08 kg
Net weight 15.84 kg
EAN code 4007754184464
Net weight 15.84 kg

Accessories for STA-1506

Intended use:
mains supply
Connectors:
1 x right-angle earthed plug,

1 x 3-pole IEC inline jack

Cable specification:
H05VV-F3G x 1mm2
Order no.: 0050097
Mains cable with IEC lock, 2 m
Intended use:
audio microphone
Connectors:
1 x NEUTRIK XLR plug,

1 x NEUTRIK XLR inline jack

Length:
1 m
Order no.: 0065940
XLR cable, 1 m, NEUTRIK
Intended use:
microphone
Length:
50 m
Colour:
black
Order no.: 0060880
Microphone cable, 2 x 0.22 mm2, 50 m, “TOP QUALITY”
Description:
set of cage nuts and screws
Type:
4 x M6 cage nut, 4 x M6 x 15 mm recessed head screw, 4 x plastic washer
Suitable for:
482 mm (19") inserts
Order no.: 0123500
Set of cage nuts and screws
Intended use:
speakers, stage, 100 V PA
Length:
100 m
Colour:
black
Order no.: 0129690
Speaker cable, 2 x 1.5 mm2, 100 m, “TOP QUALITY”

Services

SERVICE
Product & Purchasing Advice
SERVICE
Technical project management
SERVICE
Training at the MONACOR Academy
Contact
You can send us your question or request here.